Temperature compensation to guided wave-based monitoring of bolt loosening using an attention-based multi-task network

Online monitoring of bolt torque is critical to ensure the safe operation of bolted structures. Guided waves have been intensively explored for bolt loosening monitoring. Nevertheless, guided waves are excessively sensitive to fluctuation of ambient temperature. As a result of the complexity of wave transmitting across a bolted joint, it is highly challenging to compensate for the effect of temperature. To this end, an attention-based multi-task network is developed towards accurate detection of bolt loosening in multi-bolt connections over a wide range of temperature variation. By integrating improved attention gate modules in a modified U-Net architecture, an attention U-Net is configured for temperature compensation. A two-layer convolutional subnetwork is connected in series behind the attention U-Net to identify bolt loosening. Experimental validation is carried out on a bolt jointed lap plate simulating a real aircraft structure. The results have proved that the developed multi-task network achieves temperature compensation and accurate bolt loosening identification. To further understand the multi-task network, the Integrated Gradients method and a simplified structure of the bolt lap plate are used to interpret the developed network. It is proved that the A 0 mode is sensitive to bolt loosening, while the S 0 mode is not.