Extended scaling approach for droplet flow and glaze ice accretion on a rotating wind turbine blade

This paper presents and analyzes a non-dimensional model of the flow field and droplet trajectories with glaze ice accretion on a rotating wind turbine blade. The formulation leads to similitude relationships for glaze ice accretion to evaluate new scaling parameters corresponding to the rotation of the blade. New scaling parameters are developed to determine ice scaling conditions based on the geometry scale factor of a wind turbine blade. The scaling methodology can be used to determine alternative test conditions and predict glaze icing conditions on a full-scale wind turbine blade. Numerical CFD icing simulations are performed using ANSYS FENSAP ICE software. A wind blade model is developed using blade element momentum theory (BEM). Each blade size is tested at specific flow conditions using the scaling equations. Scaled conditions for velocity (streamwise and rotational), droplet size, and icing time are tested. CFD solutions for the flow field are obtained for comparisons of the velocity, droplet trajectories, pressure coefficient distributions, ice thickness, and ice shapes. Recommended parameters to be used for glaze ice scaling on a rotating blade are presented and numerical results are reported to support these recommendations. The paper provides new insights into modeling of glaze ice accretion on large wind turbine blades based on smaller scaled blade sections tested in a laboratory setting.