All-POF coupling ratio-imbalanced Sagnac interferometer as a refractive index sensor

A polymer optical Sagnac interferometer is proposed as a compact and low-cost refractive index sensor for the first time to our best knowledge. The Sagnac interferometer is fabricated by only one piece of fiber to facilitate its fabrication and to avoid losses due to misalignment or fusion. The coupler was developed based on chemical and twisting techniques of ∼ 5 c m of fiber. We modified the coupling ratio by varying the refractive index of media surrounding the coupler and consequently modified the transmission. For several values of mass percent concentration of sugar solutions surrounding the coupler, we found that transmittance decreases as the mass concentration increases. However, the decay is faster for the low concentration, while the decay is slower for higher concentrations. Two sets of experiments were carried out, at high ( ≥ 1 gm/100 ml) and low ( < 1 g m / 100 m l ) mass concentration of sugar solutions. The calibration of the sensor was done at 733 nm, where the response of the interferometer displays larger transmission variations for different solutions. The refractive index estimation was possible by correlation of the transmittance function (calculated by fitting the experimental data) with a linear refractive index model. The estimated resolution of the system is 0.057 weight percent of sugar solution, determined by the noise of the system.