An efficient pretreatment method based on AgNPs-doped SnO2 photocatalyst for the accurate detection of heavy metals in organic-rich water samples

Humic acid (HA), the primary composition of natural organic matter (NOM) widely distributed in water and soil, can complex with heavy metal ions (HMIs), i.e., Cd(II) and Pb(II) in this study, which deters the accurate detection of HMIs using square wave anodic stripping voltammetry (SWASV). Hence, in this study, an efficient pretreatment method was proposed to restore the electrochemical signal of Cd(II) and Pb(II) by breaking the complexation based on AgNPs-doped SnO2 photocatalyst combined with LP/UV irradiation. Optimization of the key parameters for electrochemical signal restoration including pH for photolysis, AgNPs doping rate, photocatalyst dosage and photolysis time were performed to further elevating the accuracy in the proposed pretreatment method over 96.9% for Cd(II) and Pb(II) in 15 min. The effect of different HA concentrations on SWASV signal of Cd(II) and Pb(II) was also investigated adopting the optimal parameters. Then, the UV–vis absorption spectra, crystal structure, and the morphology of AgNPs-doped SnO2 photocatalyst were investigated to excavate the reasons behind the most excellent AgNPs doping rate to SnO2 in signal restoration. Moreover, the behavior of HA degradation and transformation under LP/UV irradiation was studied to investigate the mechanism of electrochemical signal restoration. Finally, the feasibility of the proposed method was testified by comparing detection results with ICP-MS results using real water samples extracted from aquaculture water.