Microstructural Characteristics and Properties of Wire Arc Additive Manufactured 304L Austenitic Stainless Steel Cylindrical Components by Different Arc Welding Processes

Wire arc additive manufacturing (WAAM) is an advanced additive manufacturing (AM) technology that offers low cost and high deposition rates, making it suitable for building large metal parts for structural engineering applications. However, various welding procedures result in differing heat inputs and repetitive heating treatments throughout the deposition process, which can affect the microstructural and mechanical characteristics of the parts. In the current study, cylindrical parts made of 304L austenitic stainless steel (ASS) were manufactured using the WAAM technique, employing both gas metal arc welding (GMAW) and cold metal transfer (CMT) processes. This study explores the correlation between WAAM techniques and their effects on the bead geometry, microstructure and mechanical properties. The microstructure of the cylinders consisted of vertically growing austenite dendrites with residual ferrite (μ) within the austenite (γ) matrix. Compared to the bottom region (region ①), the top region (region ②) contained more residual ferrite. Although the microstructural characteristics from region ① to region ② are similar, they exhibit different ferrite morphologies. The rapid cooling rate in the CMT-AM process resulted in finer structures and a greater presence of ferrite phases in both regions compared to the GMAW-AM method. Cylinders produced by the CMT process displayed nearly uniform properties across both regions and demonstrated superior tensile properties, hardness, and impact toughness relative to those made using the GMAW technique. The WAAM 304L ASS cylinders also showed enhanced performance compared to stainless steel manufactured using traditional industrial forging standards, indicating that WAAM-processed 304L ASS cylinders are suitable for industrial applications.