Active vibration control of rotating carbon nanotube reinforced composite cylindrical shells via piezoelectric patches

This paper addresses the active vibration control of rotating carbon nanotube reinforced composite (CNTRC) cylindrical shells via piezoelectric actuator and sensor pairs. Considering circumferential initial stresses and Coriolis forces induced by rotation, an electromechanical coupling model of a simply supported CNTRC cylindrical shell, covered with surface-bonded piezoelectric sensors/actuators is established using the Lagrange equations and the model validation is carried out through a comparative analysis with existing literature. To suppress vibrations of rotating CNTRC cylindrical shells over a range of speeds, an LQR (Linear Quadratic Regulator) closed-loop controller is designed and its effectiveness is analyzed and evaluated through dynamic response analysis. Furthermore, the optimization of piezoelectric patch layout is performed by analyzing the performance of the controller for rotating CNTRC shells with typical piezoelectric sensors/actuators distributions. This paper presents and validates a strategy for vibration control of rotating CNTRC cylindrical shells using piezoelectric patches. The findings derived can offer guidance for vibration suppression of rotating thin-walled structures in practical engineering applications.