Conceptual design of a thermo-electrical energy storage system based on heat integration of thermodynamic cycles – Part A: Methodology and base case

热能储存 工艺工程 夹点分析 储能 热交换器 可再生能源 热能 机械工程 风力发电 热泵 压缩空气储能 工程类 环境科学 汽车工程 核工程 功率(物理) 热力学 电气工程 物理
作者
Matteo Morandin,François Maréchal,Mehmet Mercangöz,F. Buchter
出处
期刊:Energy [Elsevier]
卷期号:45 (1): 375-385 被引量:120
标识
DOI:10.1016/j.energy.2012.03.031
摘要

The interest in large scale electricity storage (ES) with discharging time longer than 1 h and nominal power greater than 1 MW, is increasing worldwide as the increasing share of renewable energy, typically solar and wind energy, imposes severe load management issues. Thermo-electrical energy storage (TEES) based on thermodynamic cycles is currently under investigation at ABB corporate research as an alternative solution to pump hydro and compressed air energy storage. TEES is based on the conversion of electricity into thermal energy during charge by means of a heat pump and on the conversion of thermal energy into electricity during discharge by means of a thermal engine. The synthesis and the thermodynamic optimization of a TEES system based on hot water, ice storage and transcritical CO2 cycles, is discussed in two papers. In this first paper a methodology for the conceptual design of a TEES system based on the analysis of the thermal integration between charging and discharging cycles through Pinch Analysis tools is introduced. According to such methodology, the heat exchanger network and temperatures and volumes of storage tanks are not defined a priori but are determined after the cycle parameters are optimized. For this purpose a heuristic procedure based on the interpretation of the composite curves obtained by optimizing the thermal integration between the cycles was developed. Such heuristic rules were implemented in a code that allows finding automatically the complete system design for given values of the intensive parameters of the charging and discharging cycles only. A base case system configuration is introduced and the results of its thermodynamic optimization are discussed here. A maximum roundtrip efficiency of 60% was obtained for the base case configuration assuming turbomachinery and heat exchanger performances in line with indications from manufacturers.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
沙脑发布了新的文献求助30
刚刚
鸑鷟发布了新的文献求助10
1秒前
尛破孩完成签到,获得积分10
2秒前
Owen应助RX采纳,获得10
3秒前
3秒前
4秒前
隐形曼青应助醉舞烟罗采纳,获得10
4秒前
4秒前
李依伊发布了新的文献求助10
4秒前
儒雅随和发布了新的文献求助10
5秒前
研友_nEoMy8完成签到,获得积分10
6秒前
小二郎应助pure采纳,获得10
7秒前
7秒前
大模型应助鸑鷟采纳,获得10
9秒前
10秒前
Oay发布了新的文献求助10
10秒前
义气笑容发布了新的文献求助10
11秒前
爆米花应助崔文兴采纳,获得10
11秒前
旖旎完成签到,获得积分20
12秒前
科研通AI5应助痴情的语堂采纳,获得10
12秒前
闪闪的闪完成签到,获得积分10
14秒前
14秒前
14秒前
15秒前
ZZCpaper发布了新的文献求助10
16秒前
杨旭完成签到 ,获得积分10
16秒前
zzzz完成签到,获得积分10
16秒前
科研通AI5应助111采纳,获得10
16秒前
鸑鷟完成签到,获得积分10
17秒前
18秒前
佳妮发布了新的文献求助10
18秒前
可爱的函函应助平常剑鬼采纳,获得10
19秒前
lalala发布了新的文献求助10
19秒前
20秒前
Tigher发布了新的文献求助10
20秒前
ljs发布了新的文献求助10
20秒前
酷波er应助188的龙采纳,获得10
20秒前
21秒前
SciGPT应助动人的如霜采纳,获得10
22秒前
崔文兴完成签到,获得积分10
23秒前
高分求助中
Continuum Thermodynamics and Material Modelling 3000
Production Logging: Theoretical and Interpretive Elements 2700
Mechanistic Modeling of Gas-Liquid Two-Phase Flow in Pipes 2500
Structural Load Modelling and Combination for Performance and Safety Evaluation 800
Conference Record, IAS Annual Meeting 1977 610
Interest Rate Modeling. Volume 3: Products and Risk Management 600
Interest Rate Modeling. Volume 2: Term Structure Models 600
热门求助领域 (近24小时)
化学 材料科学 生物 医学 工程类 有机化学 生物化学 物理 纳米技术 计算机科学 内科学 化学工程 复合材料 基因 遗传学 物理化学 催化作用 量子力学 光电子学 冶金
热门帖子
关注 科研通微信公众号,转发送积分 3554907
求助须知:如何正确求助?哪些是违规求助? 3130742
关于积分的说明 9388313
捐赠科研通 2830116
什么是DOI,文献DOI怎么找? 1555837
邀请新用户注册赠送积分活动 726328
科研通“疑难数据库(出版商)”最低求助积分说明 715653