Mesoporous hollow silicon spheres modified with manganese ion sieve: Preparation and its application for adsorption of lithium and rubidium ions

In this work, mesoporous hollow silicon spheres modified with 3‐aminopropyl‐ triethoxysilane (APTES) of loaded hydrogen manganese oxide lithium ion sieve (APTES/HMO‐ HS) was prepared. The structure and morphology of as‐prepared APTES/HMO‐HS were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy and nitrogen adsorption‐desorption measurements. The Brunner‐Emmet‐Teller (BET) surface areas, pore diameters and pore volumes of APTES/HMO‐HS decreased gradually, while the Li:Mn:Si molar ratios range from 1:1:50 to 1:1:10. The obtained hierarchical porous APTES/50HMO‐HS has a high specific surface area (557.1694 m 2 g ‐1 ). The lithium and rubidium ions solutions were used to measure the adsorption performance of the APTES/HMO‐HS adsorbent. The pseudo‐first‐order and pseudo‐second‐order kinetics, Langmuir and Freundlich isotherms of APTES/HMO‐HS were investigated; suggesting that the adsorption kinetics can be described by the pseudo‐second‐order kinetic model and the adsorption isotherms well fits the Langmuir isotherm equation. The obtained results show that the prepared APTES/HMO‐HS exhibits excellent abilities to simultaneously and selectively recover Li + and Rb + (11.22 mg·g ‐1 and 8.31 mg·g ‐1 ) and have a promising application in the simultaneous adsorption of lithium and rubidium ions.