Cellulose nanofibers isolated by TEMPO-oxidation and aqueous counter collision methods

In this research, cellulose nanofiber (CNF) was isolated by the combination of chemical 2,2,6,6-tetramethylpiperidine-1-oxylradical (TEMPO)-oxidation and physical aqueous counter collision (ACC) methods The combination of TEMPO-oxidation and ACC is an efficient method to isolate CNFs by reducing chemical usage in TEMPO-oxidation and saving energy in ACC along with controlling the size of CNFs. Two cellulose sources, hardwood bleached kraft pulp (HW) and softwood bleached kraft pulp (SW), were used for the CNF isolation with different TEMPO oxidation time and a defined number of ACC pass. The CNF properties were investigated and compared in term of morphology, crystallinity index, transparency and birefringence. The width of the isolated CNFs from HW is in the range of 15.1 nm–17.5 nm, and that of the SW CNFs is between 18.4 nm and 22 nm depending on the TEMPO oxidation time. This difference is due to the fact that SW is less oxidized than HW under the same chemical dosage, which results in larger width of SW-CNFs than HW-CNFs. The HW-CNF treated with TEMPO for over 2 h and isolated using ACC with 5 pass offers almost 90% transparency. Birefringence of CNFs exhibits that HW-CNFs show better birefringence phenomenon than SW-CNFs. The combination of TEMPO-oxidation and ACC methods is useful for isolating CNFs with its size control.