Upgrading the Performance and Stability of Lithium, Manganese‐Rich Layered Oxide Cathodes with Combined‐Formic Acid and Spinel Coating Treatment

Abstract Improving sluggish rate performance and cycling stability of Li, Mn‐rich cathode materials (LMR) is of great importance for practical implementation. Here, dual surface modification on LMR particles with formic acid washing and spinel coating improves the electrochemical performance. Dilute formic acid can remove the Li 2 CO 3 surface impurities and selectively reduce Ni while significantly increasing specific surface area by ∼32 %, unlocking more electrochemically active surfaces. Spinel coating enhances cycle stability by suppressing detrimental side reactions at electrode‐electrolyte interfaces at high voltage. Post‐annealing temperature was found to significantly affect the cathode performance. Higher temperature favors diffusion of transition metal (TM)/Li ions of the spinel coating from surface to the bulk, removing the coating by possible reconstruction into the layered structure and thus degrading the performance. The spinel coating also appears to increase Co 3+ segregation on the particle surface. Compared to the original material, the optimized sample demonstrates 47 % higher capacity retention at 3C and retains 89 % of initial capacity after 150 cycles at 0.5C. Besides, the specific energy density of 523 Wh kg −1 can be attained after 150 cycles at 0.5C. Moreover, the post‐cycling analysis of modified sample verifies a better structural integrity with less particle cracking. Altogether, this study portrays an alternative strategy to overcome the shortcomings of LMR cathode materials.