Synthesis and photocatalytic H2‐production activity of plasma‐treated Ti3C2Tx MXene modified graphitic carbon nitride

Abstract Plasma processing technology, as a promising method to enhance photocatalytic activity of catalyst, is gradually attracting extensive interest from researchers. However, the main mechanism of plasma‐treated photocatalyst on hydrogen production is not clear. In this work, 2D Ti 3 C 2 T x MXene is selected as a co‐catalyst of graphitic carbon nitride (g‐C 3 N 4 ), which carries out a plasma treatment (500°C) under N 2 /H 2 atmosphere. Due to plasma treatment, there is a higher proportion Ti–O functional groups on surface of layered Ti 3 C 2 T x MXene, especially for Ti 4+ . The obtained g‐C 3 N 4 /p‐Ti 3 C 2 T x photocatalyst with sandwich‐like structure shows an enhanced photocatalytic activity. The rate of hydrogen generation of CN/pTC3.0 sample without Pt co‐catalyst is 25.4 and 2.4 times that of pure g‐C 3 N 4 and CN/TC3.0 samples, respectively. The improved photocatalytic activity is attributed to presence of Ti 4+ due to plasma treatment, which can capture photo‐induced electron from g‐C 3 N 4 and improve the separation of electrons and holes after visible light irradiation. The cyclic hydrogen production of the photocatalyst demonstrates good photocatalytic stability. In addition, this method of plasma treatment under N 2 /H 2 atmosphere is feasible to develop a high‐performance co‐catalyst, which can be extended to other photocatalysts with two‐dimensional structure for photocatalytic water‐splitting applications.