Comparison of mechanical thrombectomy techniques in an in vitro stroke model: How to obtain a first pass recanalization?

Since mechanical thrombectomy (MT) has proven to be effective in the treatment of acute ischemic stroke (AIS), significant research has been dedicated to establishing procedural techniques offering best rate of first pass effect (FPE). In this study, we compared the efficacy of different techniques in vitro to achieve the first pass recanalisation (FPR).In vitro MT procedures were performed using a realistic silicone model of the human cerebral vasculature. The MT with stent retriever (SR) were performed with manual co-aspiration through the respective access catheter and intermediate catheter (IC), with Solumbra or partial retrieval techniques into the IC. Two SRs (Solitaire and EmboTrap) were selected to retrieve both red blood cells (RBC) rich and fibrin-rich clots. FPR rates were recorded for each case.Overall, 144 MT were performed. FPR rates using the partial retrieval and Solumbra technique were of 100% and 87%, respectively (p = 0.01). The rate of FPR was of 92% using the balloon-guide catheter (BGC) compared to 64% with the guide catheter (GC) (p = 0.0001). With an IC, no differences were found between using a BGC or a GC (87.9% vs 89,6%, p = 0.75). No significant difference was observed between the Embotrap and the Solitaire device for the rate of FPR (82% and 74%, respectively; p = 0.23).In this study, FPR rates were higher with the use of an IC associated with the partial retrieval technique, regardless the guide catheter, the SR, or the clot composition. The less effective technique was the association of GC and SR, without an IC.