Effect of PWHT on microstructure and mechanical properties of welded joint of a new Fe-Ni-based superalloy

In this study, the effect post weld heat treatment (PWHT) on microstructural evolution and mechanical properties of weld metal of HT700P alloy with Inconel 617 filler metal was investigated. After welding, columnar grain, dendritic microstructure and segregation of Mo, Co and Ti elements related to the equilibrium distribution coefficient were observed in the weld metal. The PWHT was conducted in both direct-aging treatment with different time and solution treatment with different cooling methods. The results showed that direct-aging treatment had a limit impact on homogenization of weld metal, while microstructural homogenization and elemental segregation were significantly improved after solution treatment and massive M6C and M23C6 carbides precipitated at the grain boundaries and interdendritic region of weld metal. It was found that the elongation at 700 °C of welded joints after solution treatment was relatively increased, which was related to the decrease of residual stress and the precipitation of Mo-rich carbides at the grain boundaries. The fracture occurred in the weld metal presented interdendritic fracture characteristics, and the fracture mechanism for stress relaxation cracking was the strong grain interior induced by the precipitation of γ′ phase, leading to the stress concentration and nucleation of cavities at grain boundaries. After solution treatment, the creep lifetime of furnace cooling was much greater than that of water quenching. The superior creep properties of furnace-cooled joint could be attributed to the lower residual stress and the migration of carbon element in the fusion line, which inhibited the nucleation and aggregation of cavities in the partially melted zone.