Simultaneously improve the mode II interlaminar fracture toughness, flexural properties, and impact strength of CFRP composites with short aramid fiber interlaminar toughening

Abstract This work mainly focuses on the mode II interlaminar fracture behavior of carbon fiber composite that was interlaminar toughened by short aramid fiber modified epoxy resin. The short fibers were first dispersed in the epoxy matrix and then in the laminate interlayer area during the lamination process. The ENF test evaluated the Mode II interlaminar fracture toughness of laminates. The results show that mode II interlaminar fracture toughness increases with the addition of short fibers. When the fiber content is 10 g/m 2 , the toughening effect is the best at 2437.72 J/m 2 , which is about 61.8% higher than the untoughened sample. The toughening mechanism of CFRP laminates by adding short fibers was observed by mode II fracture surface SEM images. In addition, flexural properties and Charpy impact properties of short fiber modified resin interlayer toughened laminates were also studied. The results showed that with this method, flexural properties and impact strength were improved to a certain extent, proving that this method is an effective interlaminar toughening method.