The Use of Azo Dyes in Guest-Host Displays

Abstract Azo dye molecules are cylindrically shaped, and therefore, due to their resemblance to liquid crystal molecules, would seem to be suitable for use in guest-host mixtures. The dichroic ratio of a dye in a given nematic host depends on the molecular length of the dye molecules, the order parameter of the liquid crystal host and its molecular dimensions. It is possible to obtain a guest-host mixture with an order parameter which is higher than that of the pure host. Lateral substitution of mono-azo dyes lowers the order parameter, whilst lateral substitution of the corresponding bis-and tris-azo molecules results in only a slight change in their order parameter. The stability of these compounds to light is poor, and depends on the wavelength for maximum absorption, and on the host material. Whilst lateral substitution increases the fastness of azo compounds when used for textile dying, this is not the case when they are employed with liquid crystal mixtures. The kinetics of degradation are zero order in dye concentration. It has been found that azo dyes are not in general suited to applications where prolonged exposure to sunlight may be encountered, e.g. watch applications.