Effects of the increase of longitudinal bending stiffness of advanced footwear technology on 3,000m performance, pacing strategy, and biomechanics

This study aimed to analyse the effects of shoes with increased longitudinal bending stiffness (LBS) on 3,000 m performance, pacing strategy, heart rate, and biomechanics in trained runners. Twelve male trained runners performed a 3,000 m time trial test in an experimental shoe with a carbon fibre plate to increase the LBS (LBS-increased) and a Control shoe (without carbon fibre plate). Running performance (total time), pacing, heart rate, and biomechanical variables were registered and analysed for each 1000 m split. An individual analysis of the responders was performed based on the smallest worthwhile change. The 3,000 m time trial performance improved by 0.74% (585.83 ± 33.39 vs. 590.17 ± 34.35 s, p < 0.001, large d = 0.829) in the LBS-increased condition compared to the Control condition with a high inter-individual variability. There were no significant differences for the split effect (p = 0.898, small ηp2 = 0.021). The performance improvement was accompanied by an increase in step length (p < 0.001, large ηp2 = 0.717) throughout the time trial test and an increase of flight time in the split 1 and 2 (p < 0.05, moderate d = 0.793, 0.686, respectively) and vertical oscillation in the split 2 and 3 (p < 0.05, moderate d = 0.727, 0.652). However, the heart rate remained unchanged between conditions. The increase of LBS in footwear can improve 3,000 m performance without causing changes in the pacing strategy. Small modifications in running kinematics accompanied the improvements in running performance but without changes in heart rate. Moreover, LBS-increased did not affect all runners equally highlighting the need for further understanding of individual responses.