Study on time-varying characteristics and flow behavior of microencapsulated polymer

Due to the challenges posed by high injection pressure and significant viscosity shear loss, conventional polymer flooding methods are unable to effectively meet the urgent demand for enhanced oil recovery in medium- and low-permeability reservoirs. Microencapsulated polymer flooding is a promising solution to address the aforementioned challenges due to its advantages of easy wellbore injection, shear resistance, and delayed thickening. However, there is a lack of research on the release behavior and time-dependent characteristics of microencapsulated polymer and its impact on flow behavior in reservoirs. To address this gap, we conducted a series of experiments, including thermal stability tests, microfluidic chip experiments, and micro-scale oil displacement experiments, to reveal the time-varying behavior generated by the triggered release of microencapsulated polymers. The results showed that microencapsulated polymer can be fully triggered after 8 days of aging at 85 °C, with a viscosity exceeding the initial viscosity by more than 25 times. The release mechanism of the polymer aligned with the Ritger-Peppas model, transitioning from super Case-II transport to anomalous transport, and finally to Fickian diffusion with increasing temperature. During the triggering process, the presence of particles stabilized shear and improved oil displacement, particularly in small pore throats. Higher triggering degrees of the solution resulted in greater flow resistance within the microchannel, effectively suppressing fluid fingering. The oil displacement effectiveness of fully triggered microencapsulated polymer was comparable to that of conventional polymers. This study provides insights into the flow behavior of microencapsulated polymer at a microscopic level, offering valuable references for its application in the field.