Electrochemical treatment of wastewater containing urea-formaldehyde and melamine-formaldehyde

The wastewater containing urea-formaldehyde (UF) and melamine-formaldehyde (MF) from the medium-density fiberboard (MDF) lamination factory disposed into the waterbodies adversely affects human health and aquatic life. Therefore, its treatment before discharge is necessary. Researchers have used various techniques to treat this type of wastewater in the past, but none have tried electrochemical (EC). However, EC can potentially remove pollutants such as chemical oxygen demand (COD), total organic carbon (TOC), formaldehyde (FA), total nitrogen (TN), nitrogen nitrate (NO3-N), and other hydrocarbons. Hence, this study uses the EC technique to treat wastewater containing UF and MF with aluminium electrodes. The experiments were run in batch mode with a 250 mL working volume in a 500 mL Pyrex glass beaker using a variable DC power supply (0-30 V and 0-5 A). The impacts of various parameters, including reaction time (RT) 30-240 min, current density (CD) 8.66-51.94 mA/cm2, inter-electrode distance (IED) 1-2 cm, and mixing speed in the range of 60-120 rpm were examined to achieve the best pollutant removals. The best removal percentage was reached at the optimized conditions of 150 min RT, 43.28 mA/cm2 CD, 1.5 cm IED, and 80 rpm: 81.1% TOC, 61.5% COD, 76.7% TN, 28.3% NO3-N, and 55.2% FA. During the EC process, electrodes and energy consumption were estimated at around 2.367 (g/L) and 0.18 (kWh/L), respectively. A kinetic analysis was also carried out to determine the pollutant's removal trend. This study concluded that the pseudo-first-order kinetic model was the best fit for removing TOC and FA with regression coefficients of 0.96 and 0.83, respectively.