Effects of blowing agents and curing temperatures on physical and mechanical properties of natural rubber foam for laminated floor tiles

Falling on the floor has been one of the most common causes of breaking a bone. Falls in senior homes and care facilities can lead to immobility symptoms and treatments. Rubber flooring is a great alternative for fall protection. Thus, this study aimed to investigate the effects of organic blowing agents (dinitroso pentamethylene tetramine and azodicarbonamide) on the physical and mechanical properties of natural rubber foam used for laminated floor tiles. The curing temperatures were also examined in the range of 140–160 o C. From the experimental results, the blowing agent was an important component added to the rubber foam layer at various contents and temperatures. The compression set increased when curing temperatures and adding blowing agent increased. With an increase in the curing temperature, the elongation at break decreased. The findings indicated that the mechanical properties of natural rubber foam were significantly affected by the kind of blowing agent and the curing temperature. Finally, an optimal energy absorption was found in the dinitroso pentamethylene tetramine condition with 3 phr and the curing temperature of 160°C, which offers the maximum energy absorption value of 110 J.