Room temperature compressed air-stable conductive copper films for flexible electronics

Abstract The state-of-the-art technology of fabricating printed copper electronics is focussed largely on thermal sintering restricting transition towards heat sensitive flexible substrates. Herein we report a pioneering technology which eliminates the need for conventional sintering. Biopolymer-stabilised copper particles are prepared such that they can be compressed at room temperature to generate air-stable films with very low resistivities (2.05 – 2.33 × 10 −8 Ω m at 20 °C). A linear positive correlation of resistivity with temperature verifies excellent metallic character and electron microscopy confirms the formation of films with low porosity (< 4.6%). An aqueous ink formulation is used to fabricate conductive patterns on filter paper, first using a fountain/dip pen and then printing to deposit more defined patterns (R < 2 Ω). The remarkable conductivity and stability of the films, coupled with the sustainability of the approach could precipitate a paradigm-shift in the use of copper inks for printable electronics.