材料科学
压力传感器
超声波传感器
波形
生物医学工程
血压
压电
超声波
持续监测
压电传感器
可穿戴计算机
声学
电压
计算机科学
复合材料
电气工程
机械工程
医学
放射科
工程类
嵌入式系统
运营管理
物理
作者
Bin Li,Tanyu Wang,Dan Luo,Pengfei Peng,Yu Wang,Lu Liu,Huiquan Wang,Hao Liu
标识
DOI:10.1002/admt.202201814
摘要
Abstract Blood pressure is an important indicator that reflects human health status. Since long‐term monitoring of blood pressure waveforms can provide important information for the diagnosis and prevention of cardiovascular disease. Wearable, non‐invasive, and continuous monitoring of blood pressure waveforms have become a current research hotspot. In this paper, a fabric‐based ultrasound sensors are produced for continuous non‐invasive monitoring of blood pressure waveforms by combining an “S”‐shaped stretchable island bridge electrode with a fabric substrate utilizing hot press transfer. The results show that the 4 × 5 array ultrasound sensors can locate arterial vessels deep in the tissue, allowing accurate, and continuous monitoring of blood pressure. Its axial resolution can reach 330 µm, and the elongation at the break of the “S”‐shaped electrode can reach 35.6%. The prepared sensor has good air permeability and stability, and does not cause skin irritation during long‐term wear.
科研通智能强力驱动
Strongly Powered by AbleSci AI