Solar driven thermal responsive polyionic liquid/PDDA semi-IPN hydrogel for near-room temperature membrane-free osmotic desalination

The designed thermally responsive polyionic liquid (TPIL)/ poly (diallyl dimethylammonium chloride) (PDDA) hydrogel with a semi-interpenetrating (semi-IPN) structure, containing highly charged chloride anions, was fabricated to explore the comprehensive capabilities of solar driven membrane-free osmotic desalination. Introducing linear PDDA polyelectrolyte with higher charge density has effectively excluded salt ions from entering the TPIL hydrogel matrix due to the strong charge concentration gradient established between the hydrogel and the saline reservoir. Meanwhile, the thermo-sensitivity of the polyionic liquid/PDDA semi-IPN (PNCl) hydrogel enabled the release of absorbed salt-depleted water at a temperature above the Lower Critical Solution Temperature (LCST). The multiple purification process established by partial submersion of PNCl hydrogel in saline enabled continual reduction of the salt ion concentration during the upwards transportation of water along the polyelectrolyte network. Moreover, a mushroom-shaped hydrogel demonstrated enhanced the effectiveness in long-term cyclic desalination. The “mushroom cap” was loaded with photo-thermal conversion fillers (Ti3C2Tx MXene) to achieve higher photo-thermal conversion efficiency for water recovery. A record high salt rejection rate of more than 93% was obtained for membrane-free osmotic desalination. More importantly the whole desalination/water absorption/release process was solely supported by gently heating the PNCl hydrogel under the illumination of renewable solar energy.