High Spatial Resolution Chemical Imaging of Implant-Associated Infections with X-ray Excited Luminescence Chemical Imaging Through Tissue

Microbial infections associated with implantable medical devices are a major concern in fracture fixation failure. Early diagnosis of such infection will allow successful eradication with antibiotics without an extra cost for a second surgery. Herein, we describe XELCI as a technique with high X-ray resolution, implant specificity, and chemical sensitivity to noninvasively image chemical concentrations near the surface of implanted medical devices. The devices are coated with chemically reporting surfaces. This chemically responsive surface consists of two layers coated on an implantable medical device; a pH-sensitive layer (bromothymol blue or bromocresol green incorporated hydrogel) which is coated over a red-light emitting scintillator (Gd2O2S: Eu) layer for monitoring. A focused X-ray beam irradiates a spot on the implant, and the red light generated by the scintillator (with 620 nm and 700 nm peaks) is transmitted through the sensing layer which alters the spectral ratio depending on the pH. An image is generated by scanning the X-ray beam across the implant and measuring the spectral ratio of light passing through the tissue point-by-point. We used this imaging technique for monitoring implant-associated infections previously on the bone surface of the femur with a modified implantable plate sensor. Now we are studying pH changes that occur from tibial intramedullary rod infections. Two different types of intramedullary rod designs are used in pre-pilot rabbit studies, and we learned that the XELCI technique could be used to monitor any chemical changes that occur not only on the bone surface but also inside the bone. Thus, this enables noninvasive, high spatial resolution, low background local pH imaging to study implant-associated infection biochemistry.