Preparation of the Monolith of Hierarchical Macro‐/Mesoporous Calcium Silicate Ultrathin Nanosheets with Low Thermal Conductivity by Means of Ambient‐Pressure Drying

Calcium silicate monolith was prepared by the hydrothermal reaction of a slurry of SiO2 , calcium hydroxide, and surfactant (OP-10) obtained by high-energy ball milling, followed by drying at ambient pressure. By using this strategy, the shrinkage due to the collapse of pores during the drying of porous materials, which is a commonly observed phenomena, was successfully avoided. It has a unique microstructure of hierarchical macro-/mesoporous ultrathin calcium silicate nanosheets with a layered gyrolite crystalline structure. Very interestingly, the calcium silicate nanosheets can be peeled off to give a single-layer nanosheet (1.23 nm) of gyrolite by ultrasonication. The monolith has a low apparent density (0.073 g cm(-3) ) and low thermal conductivity (0.0399 W K(-1) m(-1) ). The reasons behind why the formation of the unique hierarchical macro-/mesoporous ultrathin nanosheets avoids shrinkage during the hydrothermal reaction and drying, and considerably decreases the thermal conductivity, is discussed.