Hybridized Triboelectric‐Electromagnetic Nanogenerator for Wind Energy Harvesting to Realize Real‐Time Power Supply of Sensor Nodes

Abstract As the power consumption of various electronic devices is gradually reduced to milliwatt or even microwatt level, it is possible to achieve self‐powered electronic devices by obtaining weak energy from the environment. In this article, a hybrid nanogenerator that contains two working parts, —the triboelectric nanogenerator (TENG) in sliding independent layer mode and the electromagnetic generator (EMG) in rotating mode, is reported. The hybrid generator can effectively broaden the output voltage range while shortening the voltage boost time. After polishing the surface of nylon film with different mesh sandpaper, the maximum increase of output voltage and current can reach 60% and 80%, respectively. When the wind speed is 9 m s –1 , the maximum average output power values of TENG and EMG are 0.33 and 32.87 mW, respectively. Also the hybrid nanogenerator can stably power 200 light‐emitting diodes (LEDs) and hygro‐thermograph after working for 2 s. Compared with the method of supplying power to electronic devices after a long period of energy storage, the triboelectric‐electromagnetic hybrid nanogenerator that is designed can realize real‐time power supply for wireless sensor nodes and Bluetooth modules at a wind speed of 10.5 m s –1 , and the voltage at both ends is always maintained dynamic equilibrium.