CAD-CAM resin-ceramic material wear: A systematic review

Statement of problem The increasing use of computer-aided design and computer-aided manufacturing (CAD-CAM) systems has led to the development of resin-ceramic materials that meet the requirements of minimally invasive dentistry, including the resin nanoceramic (RNC) and polymer-infiltrated ceramic network (PICN). The wear characteristics of these materials are unclear. Purpose The purpose of this systematic review was to compare the wear resistance of resin-ceramic materials when compared with one another or with lithium disilicate glass-ceramics. Material and methods The PubMed, Scopus, and DOSS search engines were used to identify articles published between 2013 and 2021. Two independent researchers conducted the systematic review by following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines and by following a combination of keywords. Results Of a total of 310 articles, 26 were selected, including only 1 clinical study. Among these, 15 compared resin-ceramic materials with each other, while 11 compared resin-ceramic materials with lithium disilicate ceramics. Two types of wear were used to compare the materials: attrition and abrasion. The most commonly studied materials were 2 RNCs (Lava Ultimate and Cerasmart), 1 PICN (Vita Enamic), and 1 ceramic (IPS e.max CAD). Among the resin-ceramic materials, the PICN (Vita Enamic) showed less wear than the RNCs. Of the RNCs, Cerasmart had less attrition wear and less wear of the opposing teeth. Conclusions Lithium disilicate glass-ceramics have a higher wear resistance than resin-ceramic materials, but they cause more wear of the opposing teeth.