Wheel slip ratio control considering time delay characteristic for electro-mechanical braking system

Electro-mechanical braking (EMB) system is a novel brake-by-wire (BBW) system which is the development direction of the electrification and intelligent vehicle braking system. However, as the EMB contains a mechanical transmission mechanism, there is an inevitable time delay in the braking process, which will cause problems of the wheel slip ratio control. To address this issue, this paper proposes a novel wheel slip ratio control system based on a hierarchical control framework, comprising a slip ratio control layer and a clamping force control layer. Firstly, an EMB actuator model considering the stiffness and damping characteristics of the ball screw is constructed and the correspondence between the model and the EMB object is verified. Subsequently, a model-based compensate active disturbance rejection control (MCADRC) algorithm based on the EMB actuator model is designed to compensate the uncertainty of the EMB and improve the tracking accuracy of the clamping force. Furthermore, the influence of time delay on slip ratio control is analyzed and a slip ratio controller considering time delay characteristic is developed to improve the slip ratio control quality. Finally, the HiL test results show that the proposed controller can effectively reduce the jitter of slip ratio by 1.2% and improve the response speed of slip ratio control 7.8%, which prove the real-time and effectiveness of the controller.