Assessment of heavy metals migrated from food contact plastic packaging: Bangladesh perspective

Plastic-based food-contact materials are potentially threatening the environment and public health by releasing toxic heavy metals. This study aimed to identify the types of plastic commonly used in Bangladesh as food-contact materials (FCMs) and assess the migration of heavy metals from these FCMs. Plastic types were identified using attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR), and 25 samples were selected based on the category, including Polyethylene Terephthalate (PET), Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), and Polycarbonate (PC). Distilled water, 3% acetic acid, and 15% ethanol were used as food simulants to assess the overall migration of chemicals at 70 °C for 2 h. The concentrations of heavy metals (Pb, Cd, Hg, Cr, and Sb) were analyzed using an Atomic Absorption Spectrophotometer (AAS). Results revealed that the highest overall migration occurred in coffee cups measuring 3.50 ± 0.17 mg/kg (using water simulant) and in yogurt containers with a measurement of 9.17 ± 0.1 mg/kg (using 3% acetic acid). The highest concentrations of Pb, Cd, Hg, Cr, and Sb were found in PP-2 (0.45 ± 0.01 mg/kg), PP-2 (0.36 ± 0.01 mg/kg), PC-5 (0.27 ± 0.01 mg/kg), PET-2 (0.12 ± 0.01 mg/kg), and PET-1 (0.09 ± 0.01 mg/kg), respectively. The concentration of heavy metals migrated from the containers is likely to induce a health risk due to bioaccumulation from long-term ingestion of food packaged in them. The findings of this study added knowledge about harmful heavy metals leached from the FCMs in Bangladesh.