作者
Guangming Xu,Wenzhao Chen,Zhengzhong Yang,Jiyong Yang,Ziyang Liang,Wei Li
摘要
Objective The injury of the annular ligament can change the stress distribution and affect the stability of the elbow joint, but its biomechanical mechanism is unclear. The present study investigated the biomechanical effects of different flexion angles of the annular ligament on elbow joint stability. Methods A cartilage and ligament model was constructed using SolidWorks software according to the magnetic resonance imaging results to simulate the annular ligament during normal, loosened, and ruptured conditions at different buckling angles (0°, 30°, 60°, 90°, and 120°). The fixed muscle strengths were 40 N (F1), 20 N (F2), 20 N (F3), 20 N (F4), and 20 N (F5) for the triceps, biceps, and brachial tendons and the base of the medial collateral ligament and lateral collateral ligament. The different elbow three-dimensional (3D) finite element models were imported into ABAQUS software to calculate and analyze the load, contact area, contact stress, and stress of the medial collateral ligament of the olecranon cartilage. Results The results showed that the stress value of olecranon cartilage increased under different conditions (normal, loosened, and ruptured annular ligament) with elbow extension, and the maximum stress value of olecranon cartilage was 2.91 ± 0.24 MPa when the annular ligament was ruptured. The maximum contact area of olecranon cartilage was 254 mm2 with normal annular ligament when the elbow joint was flexed to 30°, while the maximum contact area of loosened and ruptured annular ligament was 283 and 312 mm2 at 60° of elbow flexion, and then decreased gradually. The maximum stress of the medial collateral ligament was 6.52 ± 0.23, 11.51 ± 0.78, and 18.74 ± 0.94 MPa under the different conditions, respectively. Conclusion When the annular ligament ruptures, it should be reconstructed as much as possible to avoid the elevation of stress on the surface of the medial collateral ligament of the elbow and the annular cartilage, which may cause clinical symptoms.