Sandwich structure of carbon-coated silicon/carbon nanofiber anodes for lithium-ion batteries

For electrospun silicon/carbon nanofiber composites, the surface precipitation of silicon nanoparticles can cause poor cycle stability. To solve this, a carbon-coated silicon/carbon nanofiber (Si/[email protected]) composite with a ‘sandwich’ structure is constructed by hydrothermal reaction of glucose and an electrospun silicon/carbon nanofiber, followed by high-temperature carbonization. The effects of the thickness of the carbon coating layer and calcining temperature on the electrochemical performance are studied. The results showed that carbon is uniformly and continuously coated on the surface of the composite fibers, which avoid direct exposure of precipitated silicon on the surface of the nanofibers to the electrolyte, reduce the occurrence of side reactions and is conducive to the stable formation of SEI films. At the same time, the carbon shell inhibit the volume expansion of silicon to a certain extent and improve the conductivity of the composites. Consequently, the obtained Si/[email protected] exhibit good rate performance and cycle stability. With the optimised carbon coating thickness and calcination temperature, the obtained electrodes deliver a reversible capacity of 1120 and 683 mA h g-1 at a current density of 0.1 and 2 A g-1 respectively, and a specific capacity of 602 mAh∙g-1 at a current density of 1 A g-1 after 100 cycles, a capacity retention rate of 80%. The facilely synthesised Si/[email protected] composite shows potential applications in high-capacity silicon-based anode materials.