Research on Influence Factors of Hydraulic Support Moving Velocity in Coal Mining Based on AMESim

In view of the high efficiency modernization coal demand, in this paper, the hydraulic support moving velocity influence factors were studied. Building simulation model of the thrust jack of hydraulic support with the simulation software AMESim, and run the simulation. Comparing the simulation results by setting different parameters value. It is concluded that the rated flow of pump station and hydraulic controlled check valve opening quantity will affect the speed of hydraulic support moving frame. This result provides reference for the optimal design of hydraulic support and improving the efficiency of coal mining. Key words: Moving velocity of hydraulic support; Rated flow; Hydraulic controlled check valve; AMESim 1 Tntroduction In the process of coal mining,the movement of hydraulic support needs in a timely manner with coal mining progresses, thrust jack plays a vital role for the movement of the hydraulic support. Therefore, it is very meaningful to research the influence factors of hydraulic support moving velocity With thrust control loop as the breakthrough point . 2 The working principle of the thrust control loop The movement of the hydraulic support and push the slide are achieved by thrust jack. Thrust jack is located in the middle part of the base of the hydraulic support, its end hinged with the base of the hydraulic support, the other end is connected with flexible scraper conveyor. When the hydraulic support moving, uninstall first, then the hydraulic controlled check valve make high pressure liquid into the piston rod cavity of thrust jack, the liquid in piston chamber flow back. At the same time, make thrust jack cylinder to move forward with the support of conveyor, thus, the whole hydraulic support is pulled to the coal wall, to complete the move. when pushing the slide, make high pressure liquid into the piston chamber , the liquid in piston rod cavity flow back, and, make the piston rod out with the support of hydraulic support. so,the conveyor is pushed to the coal wall,it is completed.