Sulfide-modified nanozerovalent iron for rapid decontamination of Cu(Ⅱ) complexes in high-salinity wastewater

Heavy metal complexes receive less attention, but they are more difficult to remove than the free heavy metals. Moreover, the high-salinity wastewaters from various industries hinder the removal of heavy metal complexes. Removal of the metal complexes is a top priority but a challenging task. Herein, a new strategy for removing Cu-EDTA from high-salinity wastewater with sulfide-modified nanozerovalent iron (S-NZVI) was proposed. The S-NZVI exhibited a considerable adsorption capacity for Cu-EDTA (∼83 mg Cu/g) at a high salt concentration (25 g/L NaCl). Similarly, the S-NZVI maintained excellent adsorption performance (∼83 mg Cu/g) in the presence of CaCl2, MgCl2, Na2SO4, and NaNO3 (25 g/L). The S-NZVI showed extremely high efficiency for Cu-EDTA removal; 50 mg/L of Cu-EDTA was almost completely removed in 1 min, and the kobs was approximately 1.5 g/(mg min). The S-NZVI showed an extensive pH working range, and within the pH range of 2-9, the Cu-EDTA was removed completely within 5 min. The excellent removal performance of the S-NZVI was due to the high reactivity and high affinity of NZVI for Cu, as well as the special substitution of Fe2+ and the interfacial reactions between S-NZVI and the copper complexes. Compared with other studies of Cu complex removal, removal with S-NZVI was a simpler process with higher efficiency. In brief, S-NZVI efficiently removed Cu complexes from harsh water environments and was reused many times. The process was simple and efficient and has broad application prospects.