Optimal work–rest cycles for an isometric intermittent gripping task as a function of force, posture and grip span

The aim of this study was to investigate the maximum acceptable contraction frequencies (i.e. work-rest cycles) for an isometric-intermittent handgrip task as a function of grip span, applied force and shoulder posture using psychophysical and physiological approaches. Twelve healthy males served as subjects. The three grip spans investigated were the optimal, 2 cm narrower than the optimal, and 2 cm wider than the optimal. The grip force levels studied were 15% and 30% of maximum voluntary grip force and the two shoulder postures were 25 degrees flexion and 30 degrees abduction. The psychophysical results indicate that subjects work faster with the narrower grip span at 15% of maximum voluntary grip force level in comparison to working with the optimal and the wider spans. However, when the task required 30% of maximum grip force level, the subjects worked faster with the optimal grip span. These findings were supported by the results of electromyography, heart rate, blood pressure and perceived discomfort. The study suggests that grip span of a tool is an important factor to be considered in predicting optimal work-rest cycles for hand grip tasks, and the optimum setting of grip span of the hand-tool depends on the required task force level. That is, the optimality is relative rather than absolute. In addition, it appears that weaker subjects can work at a higher rate than stronger ones at the same relative force level.