Effect of Polyacrylonitrile Surface Coating on Electrochemical Performance of LiNi0.8Mn0.1Co0.1O2 in All Solid-State Batteries

Ni rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is one of the most promising cathode materials for high energy all solid-state batteries. However, its poor ionic and electronic conductivity along with high interfacial instability with thiophosphate-based solid electrolytes result in severe capacity loss with cycling. In this paper, a polyacrylonitrile (PAN) coating is applied on the surface of NMC811 followed by a simple heat treatment in air. The PAN coating layer not only helps to improve the electronic conductivity of the cathode composite but also prevents the direct contact of NMC811 active material with the solid electrolyte, reducing the decomposition of the electrolyte and formation of passivating layers with low ionic conductivity. Compared to pristine NMC811, the electrochemical properties of PAN-NMC composites are significantly improved. When cycled at 0.1 C rate, PAN-NMC composite shows an initial capacity of 192.16 mAh g −1 and capacity retention of 68.5% over 100 cycles compared to the lower capacity of 173.06 mAh g −1 and retention 58.68% for the pristine NMC811. These results indicate that the PAN coating greatly improves the conductivity and cycling performance of NMC811.