Synthesis of cationic polyacrylamide via inverse emulsion polymerization method for the application in water treatment

In order to improve the flocculent efficiency of wastewater treatment, a cationic flocculant poly (acrylamide-[2-(methacryloyloxy) ethyl] trimethyl ammonium chloride) (P (AM-DMC)) (CPAM) has been synthesized successfully via an inverse emulsion polymerization. Acrylamide (AM) and [2-(methacryloyloxy) ethyl] trimethyl ammonium chloride (DMC) were served as monomers. The molecular structure of CPAM was characterized by Fourier transform infrared spectra (FT-IR) and 1H nuclear magnetic resonance spectrum (1H-NMR). The morphology of CPAM particles has been investigated by transmission electron microscope (TEM). Results showed that CPAM was the copolymer of AM and DMC and the particles of CPAM were uniform spheres (the size was about 200 nm). The synthetic conditions of CPAM have been studied and optimized by single-factor experiments. An optimized product was obtained at an intrinsic viscosity of 560 mL/g with a total monomer concentration of 25% and initiator concentration V50 of 0.2% (based on the total monomer mass). The amount of emulsion was 6% and the HLB (Hydrophile-Lipophile-Balance) of emulsion was 7.3. In addition, the flocculation property of CPAM was evaluated with kaolin suspension using jar test, and the result demonstrated that the flocculation property of CPAM performed better than kaolin flocculation.