Effects of CFRP sheets on the flexural behavior of high-strength concrete beam

Abstract The aim of this study is to evaluate numerically the effects of carbon fiber-reinforced polymer (CFRP) sheets strengthening on the flexural performance of high-strength concrete (HSC) beam using ABAQUS 3D finite element (FE) modeling software. The developed FE models were verified against the experimental results found in literature. The FE models can accurately estimate the performance of CFRP-strengthened high-strength reinforced concrete (RC) beams. Subsequent parametric analysis was performed to assess the performance of CFRP-strengthened concrete beams considering various parameters including compressive strength of concrete, CFRP width, thickness, length, number of CFRP layers, and CFRP strengthening schemes. Based on the results of FE analysis. It was demonstrated that using HSC significantly enhances the performance of CFRP-strengthened RC beams. It was also confirmed that width, thickness, and layer number of CFRP sheets improve the flexural behavior of CFRP-strengthened HSC beams by increasing the ultimate loads and strain-hardening behavior of the specimens. The strengthening schemes contribute to delaying or inhabiting the debonding especially when the CFRP sheets are added along the bottom of the beams. It was demonstrated that using CFRP sheets U-wrapping contributes to the prevention or delay of debonding and increases the capability of resisting the stress imposed on the concrete. Therefore, installing the CFRP sheets at the bottom face of beam below the tensile reinforcement enhances the performance of CFRP-strengthened HSC beams.