Electrochemical Lithium Deposition on LixTi5O12

Lithium metal batteries (LMBs) have been regarded as one of the most promising next-generation high-energy-density storage devices. However, uncontrolled lithium dendrite growth leads to low Coulombic efficiencies and severe safety issues, hindering the commercialization of LMBs. Reducing the diffusion barrier of lithium is beneficial for uniform lithium deposition. Herein, a composite is constructed with Li4Ti5O12 as the skeleton of metallic lithium (Li@LixTi5O12) because Li4Ti5O12 is a "zero-strain" material and exhibits a low lithium diffusion barrier. It was found that the symmetric cells of Li@LixTi5O12 can stably cycle for over 400 h at 1 mA cm-2 in the carbonate electrolyte, significantly exceeding the usual lifespan (∼170 h) of the symmetric cell using a lithium metal electrode. In a full cell with Li@LixTi5O12 as the anode, the cathode LiFePO4 delivers a capacity retention of 78.2% after 550 cycles at 3.6C rate and an N/P ratio = 8.0. This study provides new insights for designing a practical lithium anode.