Electrochemical Performances of PtCrCo Alloy/Nitrogen-Doped Activated Carbon for Proton Exchange Membrane Fuel Cell Catalyst

Proton Exchange Membrane Fuel Cell is a promising green energy conversion machine. However, some drawbacks, such as Pt corrosion on the cathode side, the high price of Pt, Nafion membrane, and the need for the high precision assembly process, limit their commercialization. In this study, PtCrCo alloy which is supported by nitrogen-doped activated carbon was synthesized by facile method to increase electrochemical performance as a cathode catalyst and reduce Pt catalyst usage. Nitrogen-doped Activated Carbon/PtCrCo/Nitrogen-doped Carbon (NAC/PtCrCo/N) catalyst was investigated to analyze the effect of increasing the composition of nitrogen-doped activated carbon in the synthesis process on the morphology and electrochemical performances of the catalyst. Polyaniline (PANI) as Nitrogen precursor was added to Activated Carbon (AC) powder with ratio of AC to PANI; 1:0, 3:1, 1:1, 1:3, as called AC, NAC1, NAC2, and NAC3 respectively. The catalyst synthesis process is carried out with the four activated carbon supports. Material characterizations were carried out using X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), Brunauer-Emmett-Teller (BET), Cyclic Voltametry (CV), and Linear Sweep Voltametry (LSV). The XRD measurement shows that the addition of nitrogen doping tends to reduce the diffraction peak intensity of nitrogen-doped activated carbon compared to the pristine carbon. The doping also increases the surface area of the activated carbon as measured by the BET method. Nitrogen doping increases the conductivity and the addition of alloys can add better stability and catalytic activity for cyclic voltammetry results of the four catalysts cannot be calculated. The NAC3/Pt-Cr-Co/N electrocatalyst exhibited the highest initial potential at ~1 mAcm -2 of 0.997 V compared to the other four samples. On the other hand, AC/Pt-Cr-Co/N catalyst has the highest current density value of 22.156 mAcm -2 .