Investigation on Creep Deformation and Age Strengthening Behavior of 304 Stainless Steel under High Stress Levels

The creep deformation behavior and age strengthening behavior of 304 stainless steel under high stress levels were systematically studied by uniaxial creep test, tensile test, XRD diffraction test and transmission electron microscopy. The results show that the total creep strain and the initial creep strain rate increase with the increase in stress level, and the creep strain in the whole aging process is mainly produced in the initial creep stage. The calculated stress exponent shows that the main mechanism of creep deformation of 304 stainless steel at 453 K is dislocation slip. The strength and plasticity of 304 stainless steel after creep aging are improved simultaneously. Microstructural observations indicate an increase in dislocation density and martensite content, as well as austenite and twins, leading to an improvement in strength and plasticity, respectively. In addition, considering the influence of dislocation density on creep behavior, the relative dislocation density increase is introduced into the hyperbolic sine creep model, and a simple mechanism-based creep aging constitutive model is established. The creep strain predicted by the model is in good agreement with the experimental data of 304 stainless steel. The findings can provide theoretical support for the application of creep age forming in 304 stainless steel parts.