轮廓仪
材料科学
复合材料
表面粗糙度
假牙
压痕硬度
表面光洁度
接触角
润湿
牙科
微观结构
医学
作者
Ziad Nawaf Al‐Dwairi,Kawkab Y. Tahboub,Nadim Z. Baba,Charles J. Goodacre,Mutlu Özcan
摘要
Abstract Purpose To compare surface properties of 2 brands of pre‐polymerized resin blocks for complete dentures (CAD/CAM PMMA) to conventional heat‐polymerized PMMA. Materials and Methods A total of 45 rectangular specimens (25 × 25 × 3 mm) were fabricated from 3 brands of PMMA (n = 15/group): AvaDent CAD/CAM PMMA, Tizian‐Schütz CAD/CAM PMMA, Meliodent conventional PMMA. Specimens were examined for wettability using the sessile drop method, surface roughness using a digital contact profilometer, and microhardness using Vickers hardness number. Statistical analysis was performed using one‐way ANOVA and Tukey pairwise multiple comparisons. p‐ Values of ≤0.05 were considered significant. Results AvaDent specimens demonstrated the highest mean contact angle (72.87 ± 48°) and the highest mean Vickers hardness number (20.62 ± 0.33). The conventional heat‐polymerized specimens showed the highest mean surface roughness (0.22 ± 0.071 μm). Tizian‐Schütz specimens showed the lowest mean surface roughness (0.12 ± 0.02 μm). Conclusions As CAD/CAM PMMA groups exhibited significantly more favorable surface properties in comparison to the conventional heat‐polymerized groups, CAD/CAM dentures are expected to be more durable. Different brands of CAD/CAM PMMA may have inherent variations in surface properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI