化学
催化作用
介孔材料
介孔二氧化硅
还原剂
金属
粒径
反应速率常数
X射线光电子能谱
4-硝基苯酚
贵金属
柠檬酸钠
无机化学
过渡金属
化学工程
核化学
动力学
物理化学
有机化学
病理
工程类
物理
医学
量子力学
作者
Said M. El‐Sheikh,Adel A. Ismail,Jafar F. Al‐Sharab
摘要
Precious metals, Au, Pt, and Pd, were successfully deposited on highly ordered mesoporous SBA-15. Two different reduction routes were employed to deposit precious metals: (1) under H2 and (2) using sodium citrate. Samples prepared using sodium citrate exhibit a uniform particle size of 10 nm while samples synthesized under H2 show high dispersion with a particle size of 8 and 20 nm for Pt and Pd, respectively. The surface area and pore volume of the mesoporous SBA-15 were significantly reduced due to the impregnation of the precious metals. Detailed TEM and XPS analyses reveal a uniform distribution of particles with a metallic valence state and no evidence of metallic oxides. The prepared catalysts were used to reduce p-nitrophenol (PNP) into p-aminophenol (PAP) where two trends were observed. The catalytic reduction efficiency for PNP reduction using the catalyst prepared with sodium citrate as a reducing agent is in the order of Au > Pt > Pd with a rate constant of 3.24 × 10−1 s−1 for Au/SBA-15. On the other hand, the catalyst prepared with H2 as a reducing agent showed a reverse trend Pd > Pt > Au with a rate constant of 7.15 × 10−1 s−1 for Pd/SBA-15. The highest catalyst efficiency was observed for the case of Pd/SBA-15 synthesized via the H2 route with a rate constant of 7.15 × 10−1 s−1. Also the reaction rate of Pd/SBA-15 synthesized via the H2 route was 2.2 times higher than that of Au/SBA-15 prepared using the sodium citrate route.
科研通智能强力驱动
Strongly Powered by AbleSci AI