Simulation of coupled transient heat and water vapor transfer in porous fiber membrane with different fiber orientations and porosity

The transfer process of heat and water vapor in a porous fiber membrane was investigated through the simulation of a 3D model for optimizing the configuration design. 3D models with different fiber orientations and porosity were constructed by the parameter input method, and the accuracy of the model was validated by the coefficient of determination (R 2 ) between the apparent velocity of the model and the air permeability of the membrane. The permeability of 3D model was used to reflect the discrepancy in fiber orientation of the model. The influences of fiber orientation and porosity on heat and water vapor transfer were surveyed by the coupled physics of heat transfer and dilute substance transfer. Since there was no temperature difference in the entire domain, heat conduction (10 −9 W/m 2 ) and moisture convection (10 −14 mol·m −2 ·s −1 ) were faint in the model. With the diffusion of water vapor in the moisture, the heat convection flux and water vapor diffusion flux gradually decreased and reached equilibrium. When the permeability was increased by adjusting the fiber orientation (from 1.002 to 1.200 m 2 ), the heat convection flux and water vapor diffusion flux followed a similar growth pattern due to the coupling effect of heat transfer and water vapor transfer. The R 2 for the heat convection flux and water vapor transmission rate of the simulations and experiments with different porosity (44.87, 47.64 and 50.15%) were 0.999 and 0.923, respectively, which demonstrated the validation of the simulation in heat and water vapor transfer.