Corrosion resistance and conductivity behavior of Cr-Al-N MAX phase coatings prepared by magnetron sputtering technology

Chromium aluminum nitride (CrAlN) coatings containing Cr2AlN phase were prepared by unbalanced magnetron sputtering followed by annealing at 1000°C. The crystal structures, X-ray diffraction patterns, and selected area electron diffraction patterns of the Cr2AlN phase were modeled using computer software and compared with experimental observations. A good agreement was found between the two sets of results, thereby confirming the presence of Cr2AlN phase in the coatings. While previous studies have demonstrated the formation of Cr2AlN phase theoretically, this study presents experimental evidence of its physical existence. The potentiodynamic polarization results and interfacial contact resistance measurements show that the CrAlN coating with Cr2AlN phase has excellent corrosion resistance (a corrosion current density of 5.35 × 10−7 A/cm2 and electrical conductivity of 5.5 mΩ·cm2) and is thus a promising candidate for the protection of fuel cell bipolar plates.