机械加工
材料科学
表面完整性
表面粗糙度
因科镍合金
电火花加工
因科镍合金625
冶金
二氧化碳
合金
压痕硬度
表面光洁度
复合材料
微观结构
生态学
生物
作者
Agnieszka Żyra,Sebastian Skoczypiec,Rafał Bogucki
出处
期刊:Key Engineering Materials
日期:2022-07-22
卷期号:926: 1681-1688
被引量:2
摘要
The dry-EDM process is environmentally neutral and enables to obtain good machining accuracy and relatively good surface quality. On the other hand, the application of dry-EDM is limited due to problems with the effective dissipation of heat from the machining zone and instability of material removal. The machining of Inconel 625 alloy was carried out in the carbon dioxide as a dielectric supplied to the machining gap through the channel in the working electrode, in the milling kinematics. In one of the investigated variants, the workpiece was submerged additionally in the deionized water during machining. The main aim of this research was to determine an influence of EDM milling in carbon dioxide with and without external workpiece cooling on the workpiece technological surface integrity ie. roughness, morphology and microhardness. The pulse time, current amplitude and gas pressure were selected as investigated parameters. Obtained results indicate significant differences in surface layer properties for both investigated machining variants.
科研通智能强力驱动
Strongly Powered by AbleSci AI