Switched Reluctance Motor Drives

PRINCIPLE OF OPERATION OF THE SWITCH RELUCTANCE MOTOR (SRM) Introduction Background Elementary Operation of the Switch Reluctance Motor Principle of Operation of the Switched Reluctance Motor Derivation of the Relationship Between Inductance and Rotor Position Equivalent Circuit SRM Configurations Linear Switched Reluctance Machines References DERIVATION OF SRM CHARACTERISTICS Introduction Data for Performance Computation Analytic Method for the Computation of Machine Characteristics Computation of Unaligned Inductance Computation of Aligned Inductance Computation of Inductance vs. Rotor Position vs. Excitation Current Comparison of Measured, Analytic and Finite Element Results References DESIGN OF SRM Introduction Derivation of Output Equation Selection of Dimensions Design Verification Operational Limit Selection of Number of Phases Selection of Poles Ratio of Pole-Arc to Pole-Pitch Selection of Pole Base Selection of Pole-Arcs Measurement of Inductance Calculation of Torque Design of Linear Switched Reluctance Machine (LSRM) References CHAPTER 4: CONVERTERS FOR SRM DRIVES Converter Configurations Asymmetric Bridge Converter Asymmetric Converter Variation Single Switch per Phase Converters m Switches and 2m Diodes m Switches and 2m Diodes with Independent Phase Current Control (m+1) Switch and Diode Configurations One Common Switch Configuration Minimum Switch Topology With Variable DC Link Variable DC Link Voltage with Buck Boost Converter Topology 1.5m Switches and Diodes Configuration Comparison of Some Power Converters Two Stage Power Converter Resonant Converter Circuits for Switched Reluctance Motor Drives References CONTROL OF SRM DRIVE Introduction Control Principle Closed Loop Speed Controlled SRM Drive Design of Current Controllers Flux Linkage Controller Torque Control Design of the Speed Controller References MODELING AND SIMULATION OF SRM DRIVE SYSTEM Introduction Modeling Simulation References ACOUSTIC NOISE AND ITS CONTROL IN SRM Introduction Sources of Acoustic Noise in Electrical Machines Noise Sources Noise Mitigation Qualitative Design Measures to Reduce Noise Measurement of Acoustic Noise and Vibrations Future Directions Appendix-1: Derivation of First Mode Frequency of SRM References SENSORLESS OPERATION OF SRM DRIVES Introduction Current Sensing Rotor Position Measurement Methods Rotor Position Estimation References APPLICATION CONSIDERATIONS AND APPLICATIONS Introduction Review of SRM Drive Features for Application Consideration Applications Emerging applications References