摩擦学
润滑
黄铜
摩擦学
边界润滑
材料科学
粘着磨损
表面光洁度
复合材料
冶金
表面粗糙度
胶粘剂
机制(生物学)
图层(电子)
哲学
认识论
铜
作者
Lin Liu,Chao Yang,Jianzhong Zhou,Hamid Garmestani,Davoud Dastan
标识
DOI:10.1134/s2070205121010147
摘要
The tribological tests of brass and steel are carried out on an in-situ tribometer. The Stribeck curve illustrates that the roughness and the wear rate as a whole reflect the lubrication regimes. Under boundary lubrication, a mathematical model based on positive pressure and roughness is established. A good agreement between the measurement and the prediction is found. According to the analysis of worn surface morphology, the main wear mechanism of brass is adhesive wear under boundary lubrication, which results in relatively high values of tribological parameters. The oxides strengthening layer is hardly generated under boundary lubrication until the experiment enters the mixed lubrication (ML) and the hydrodynamic lubrication (HL) regimes.
科研通智能强力驱动
Strongly Powered by AbleSci AI