多溴联苯醚
微粒
环境化学
化学
污染物
持久性有机污染物
大气温度范围
多溴联苯
多环芳烃
有机化学
气象学
物理
作者
ChuanYang Cai,Liyuan Chen,He Qing Huang,Liu Yang,ShuangYu Yu,Yu Liu,Shu Tao,Wenxin Liu
标识
DOI:10.1016/j.jhazmat.2019.120849
摘要
The effects of temperature on the emission of pollutants during the thermal treatment of electronic waste have rarely been investigated. The emission of particulate matter (PM), polycyclic aromatic hydrocarbons (PAHs), and polybrominated diphenyl ethers (PBDEs) from the thermal treatment of printed wiring boards was investigated over a temperature range of 320-600 °C. The emission factors (EFs) were determined to be within 1.6-7.6 g/kg, 2.23-11.9 μg/g, and 0.9-5.5 μg/g, respectively. High temperatures increased the formation of PAHs and CO, but decreased the emission of PBDEs, PM, and organic carbon. A temperature of 480 °C was determined to be optimal. Low-molecular-weight components were the dominant PAH species. The compositional profiles of PBDEs were clearly observed to vary with the temperature. Small particles (< 2.1 μm) that were more affected by temperature were dominant in PM, particle-bound PAHs, and PBDEs at all temperatures. High temperature increased the EFs of gaseous PAHs but had no remarkable effect on those of particulate PAHs. The freshly emitted PAHs primarily existed in the particulate phase at low temperatures, while the gaseous phase PAHs became prevailing at ≥ 520 °C. The particulate PBDEs were more susceptible to temperature and overwhelmingly dominant over the entire temperature range considered.
科研通智能强力驱动
Strongly Powered by AbleSci AI