Biomechanical effects of osteoporosis severity on the occurrence of proximal junctional kyphosis following long-segment posterior thoracolumbar fusion

Background Proximal junctional kyphosis is a common long-term complication in adult spinal deformity surgery that involves long-segment posterior spinal fusion. However, the underlying biomechanical mechanisms of the impact of osteoporosis on proximal junctional kyphosis remain unclear. The present study was to evaluate adjacent segment degeneration and spine mechanical instability in osteoporotic patients who underwent long-segment posterior thoracolumbar fusion. Methods Finite element models of the thoracolumbar spine T1-L5 with posterior long-segment T8-L5 fusion under different degrees of osteoporosis were constructed to analyze intervertebral disc stress characterization, vertebrae mechanical transfer, and pedicle screw system loads during various motions. Findings Compared with normal bone mass, the maximum von Mises stresses of T7 and T8 were increased by 20.32%, 22.38%, 44.69%, 4.49% and 29.48%, 17.84%, 40.95%, 3.20% during flexion, extension, lateral bending, and axial rotation in the mild osteoporosis model, and by 21.21%, 18.32%, 88.28%, 2.94% and 37.76%, 15.09%, 61.47%, −0.04% in severe osteoporosis model. The peak stresses among T6/T7, T7/T8, and T8/T9 discs were 14.77 MPa, 11.55 MPa, and 2.39 MPa under lateral bending conditions for the severe osteoporosis model, respectively. As the severity of osteoporosis increased, stress levels on SCR8 and SCR9 intensified during various movements. Interpretation Osteoporosis had an adverse effect on proximal junctional kyphosis. The stress levels in cortical bone, intervertebral discs and screws were increased with bone mass loss, which can easily lead to intervertebral disc degeneration, bone destruction as well as screw pullout. These factors have significantly affected or accelerated the occurrence of proximal junctional kyphosis.