Measurement technology based on a Stokes parametric polarization system

Structured light measurement systems often use polarization filters to reduce image interference from highly reflective areas. This method can be effective, but it may also reduce the brightness of specific areas, particularly overly dark portions, which can affect the accuracy of the measurement results. This paper proposes a measurement method for a polarization system based on Stokes parameters to solve the problem. After adjusting the polarization filter to angles of 0°, 45°, and 90°, the camera captures an image of the object and calculates the corresponding Stokes parameters to generate the expected polarization angle histogram. Then, based on the detailed information on the angle distribution, the accurate mathematical model is used to screen the interval, and the optimal polarization angle is determined by orthogonal processing while ensuring the signal-to-noise ratio and image quality. Finally, an image fusion technology synthesizes a set of fringe projection images with the preferred polarization angles. Experiments have shown that this new method effectively addresses the issue of interference in the highlighted region when using conventional polarization filters. Additionally, it significantly improves the quality of the fringe pattern. The polarization angle selection in the experimental process is made more rapid and accurate through the quantitative mathematical model calculation of the polarization angle, significantly improving the system's measurement efficiency.