Facile fabrication of lightweight and high expanded TPU/PBS bead blend foam with segregated microcellular network for reduced shrinkage and enhanced interface bonding

The emergence of expanded thermoplastic polyurethane foam beads (ETPU) has expanded the application range of polymer foam materials. However, most of the prepared bead foam products suffer from high shrinkage rate, high density, and poor interfacial bonding, severely affecting the mechanical stability and lightweighting of the products. Herein, this study constructed thermoplastic polyurethane/polybutylene succinate (TPU/PBS) bead blend foams with a segregated microcellular network structure (SMNS) for the first time, where the TPU/PBS continuous phase formed the SMNS and the bead phase was consisted of TPU foam beads. The results showed good interfacial bonding between the continuous and bead phases. By adding PBS to the continuous phase, the shrinkage percentage of TPU/PBS bead blend foam decreased from 79.19% to 67.31%, reduced by 15.0%. In addition, the foam expansion ratio gradually decreased with increasing PBS content, dropping from 12.07 to 9.03. Moreover, TPU/PBS bead blend foams exhibited good energy absorption and mechanical stability without sacrificing thermal insulation performance. This work effectively reduced the shrinkage of TPU based foam materials, offering a simple and economical solution for the preparation of dimensionally stable, well-interfaced, and lightweight polymer foams.